LASER ENGRAVING TUTORIALS
|
YOU WILL NEED:
1. Caliper 2. Thin piece of wood 3. Blank piece of paper CALIBRATION STEPS: 1. Calibrate the Focal Point 2. Calibrate the Camera 3. Generate the G-code 4. Start Engraving or Cutting |
|
USING THE ROTARTY TOOL YOU WILL NEED: 1. Caliper 2. Screwdriver 3. Rotary Chuck Wrenches |
CNC CARVING TUTORIALS
YOU WILL NEED:
1. Caliper 2. Ruler 3. CNC Clamps and Bit GETTING STARTED: 1. Generate the G-code 2. Fix the Material 3. Assemble the CNC Bit 4. Set Work Origin and Begin |
|
3D PRINTING TUTORIALS
|
YOU WILL NEED:
1. Calibration card 2. Filament 3. Tweezers GETTING STARTED: 1. Calibrate the heated bed 2. Load Filament 3. Generate G-code 4. Start Printing |